HBD40 Single Station Blow Molding Machine

KB2000L/IBC tankblow molding machine is specially used to produce single and double & Three-layer IBC tank. Its production capacity is 14-15 kg, 185 seconds per tank. This machine is equipped with 120 30:1 polymer screw and frequency conversion motor. The screw part is equipped with two sets of pressure sensors and a 50L double& Three-layer accumulator die-head. Servo Hydraulic Drive ( Rexroth )，21-inch imported high-definition touch screen ( From Germany with remote debugging and monitoring). 

It can also be used in 220 liters double ring drum production (equipped with multiple sets of procedures and corresponding down-blowing device). We are a professional blow molding machine manufacturer. We always focus on blow molding.

Specifications Units KB2000L/IBC Single layer KB2000L/IBC Double layer KB2000L/IBC Three layer
Material HMWHDPE HMWHDPE HMWHDPE
Max.Product capacity L 2000 2000 2000
Die quantity Set 1 1 1
Machine dimension M 10.9×4.3×7.9 10.9×4.3×7.9 10.9×4.3×7.9
Machine weight Ton 50 55 60
Clamping Unit
Clamping force KN 1800 1800 1800
Distance between platens mm 1000-3000 1000-3000 1000-3000
Platen size mm 1500×1800 1500×1800 1500×1800
Power
Total power KW 420 520 600
Average energy consumption KW 300 350 400
Hydraulic drive power KW 37+7.5 37+7.5 37+7.5
Air pressure Mpa 1.0 1.0 1.0
Air consumption m³/min 5.0 5.0 5.0
Extruder unit
Screw diameter mm 150 120×2 100/120/100
Screw L/D ratio L/D 30 30 30
Plasticising capacity Kg/hr 600 400×2 200/400/200
Quantity of screw heating zone Zone 7 7+7 5+7+5
Extruder heating power KW 49 42×2 24+42+24
Extruder driving power KW 160 132×2 75+132+75
Die-head
Quantity of die heating zone Zone 8 8 8
Power of die heating KW 56 56 56
Max.diameter of die mm 800 800 800
Accumulator capacity L 40 50 50
Fill out my online form.

Scroll to Top